{"id":6674,"date":"2022-05-07T00:43:12","date_gmt":"2022-05-07T00:43:12","guid":{"rendered":"https:\/\/www.pvcworkshop.com\/?p=6674"},"modified":"2022-05-07T00:43:14","modified_gmt":"2022-05-07T00:43:14","slug":"house-water-pressure","status":"publish","type":"post","link":"https:\/\/www.pvcworkshop.com\/house-water-pressure\/","title":{"rendered":"Understanding Your Home’s Water Pressure"},"content":{"rendered":"\n

The water pressure in your home is something that you might not think about often, but it’s a vital part of your home’s plumbing system<\/a>. Your home’s water pressure is what provides the force necessary to push water through the pipes and into your fixtures.  In this blog post, we’ll explain what water pressure is and how to troubleshoot any potential problems.<\/p>\n\n\n\n\n\n

What is water pressure?<\/h2>\n\n\n\n

Water pressure is the force with which water flows through your pipes. It is measured in pounds per square inch (psi). The average home has a water pressure of 40 to 60 psi.<\/p>\n\n\n\n

What is psi?<\/h3>\n\n\n\n

Pounds per square inch (psi) is a unit of measurement that expresses the amount of force that is exerted on a given area. In this case, the unit is used to measure the amount of force that water exerts on your pipes.<\/p>\n\n\n\n

How is water pressure created?<\/h2>\n\n\n\n

Water pressure is created by the force of gravity. When water is drawn from a well or city water supply, it is under pressure from the weight of the water above it. This pressure is transferred to your home’s plumbing system, and it is what allows water to flow through your pipes and fixtures.<\/p>\n\n\n\n

How does house water pressure work?<\/h2>\n\n\n\n

Your home’s water pressure is generated by the municipal water supply and regulated by a pressure regulator. The municipal water supply is typically pressurized to around 50 psi (pounds per square inch). The pressure regulator is installed at the point where the water enters your home, and it works to maintain consistent water pressure throughout your house. Generally speaking, the higher the water pressure, the greater the flow rate. As such, if you find that your shower doesn’t have enough power or your faucets are producing a weak stream, it’s likely that your house has low water pressure.<\/p>\n\n\n\n

How to test the water pressure in your home?<\/h2>\n\n\n\n

Testing the water pressure in your home is a relatively simple process. All you need is a water pressure gauge, which can be purchased at most hardware stores. Once you have the gauge, attach it to an outdoor faucet and turn on the water. The gauge will give you a reading of the water pressure in psi. If the reading is below 40 psi, then you likely have low water pressure.<\/p>\n\n\n\n

What causes low water pressure?<\/h2>\n\n\n\n

There are a number of potential causes of low water pressure. One possibility is that the municipal water supply is not providing enough pressure. This is something that you’ll need to take up with your local water authority. Another possibility is that there is an issue with your home’s plumbing. This could be anything from a blockage in the pipes to a leak. If you suspect that there is an issue with your home’s plumbing, then you should contact a licensed plumber.<\/p>\n\n\n\n

What are the dangers of low water pressure?<\/h3>\n\n\n\n

While low water pressure is not necessarily dangerous, it can be a nuisance. Additionally, if you have low water pressure and your home is located in an area that is prone to wildfires, it could make it more difficult to fight the fire.<\/p>\n\n\n\n

What are the signs of low water pressure?<\/h3>\n\n\n\n

There are a few signs that you may have low water pressure in your home:<\/p>\n\n\n\n